I don't use JT modes, but on RTTY and PSK I've found a similar issue with my
K3S. I've mentioned it here in the past more in reference to the built-in sound
card super sensitivity affecting VOX setup. The best I've done is to go into
the Windows Sound setup and reduce the output (speaker) gain to about -30 dB.
This will reduce the touchiness of the Mic (Line Level). Still I find it near
impossible to set up for "flickering" bars, however.
This isn't an issue with my old K3 using the computer sound card and analog
audio in and out of the K3. Progress?
On 2/27/2016 3:17 PM, Sid Frissell wrote:
Howdy
Been using my K3s (S/N 10462) for JT-65/JT-9 and am struggling with setting
the ALC. I am using the Mic Gain control for fine tuning---unbelievably fine.
You really can't actually touch the knob, you just breath on it or think hard
about moving it! It is the most sensitive control I have ever had to deal
with in my 60 years as a ham! Am I missing something? Is there a better way
to get old bar No. 5 jumping? KE7K says that's what you do. I can do it but
hoping there's a easier way. Any help?
Sid, NZ7M
Sent From Sid Frissell's iPad
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to w...@triconet.org
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com