Problem solved, and I don't know why. I posted a few minutes ago saying the blinking indicator was the PWR not SWR. I looked at all my connections, they were fine. Pushed in all the connectors and all were tight. I ran the utility program for KXPA100 and no faults were found. I then checked all connections again, and everything now works. I am puzzled, but I wanted to get back to the group so no one else tried to help me now that the problem is solved. If someone has had a similar experience, I would like to know what might have been going on.
Thanks and 73's Terry, N7TB -----Original Message----- From: Dick Dievendorff [mailto:[email protected]] Sent: Tuesday, March 01, 2016 5:13 PM To: 'Terry Brown'; [email protected] Subject: RE: [Elecraft] Correction to KPXA100 and KX3 problem This indicates that the KXPA100 has started, but not yet completed an ATU tuning cycle and would like some RF carrier to complete the tune. 73 de Dick, K6KR -----Original Message----- From: Elecraft [mailto:[email protected]] On Behalf Of Terry Brown Sent: Tuesday, March 1, 2016 17:04 To: [email protected] Subject: [Elecraft] Correction to KPXA100 and KX3 problem I gave some wrong information in my last post about my tuning problem. The blinking light is my Power indicator, not my SWR. The 25 led is blinking and I have no power output from the KX3 even if the power setting is 100W. Thanks, Terry ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
