I used a SignaLink for quite a few years and then I changed to a
Tascam US-122 mkII. When I used the SignaLink on PSK, I had to
ride the RF gain to keep the digitized audio volume within
acceptable input levels. With the Tascam, I no longer need to do
that. The downside of the Tascam is it requires special drivers
which aren't available for ARM linux.
You can get by with a minimal sound card, but there is value in
a better one.
73 Bill AE6JV
On 3/6/16 at 3:53 PM, [email protected] (Don Wilhelm) wrote:
If your soundcard will be used for digital modes only, then you
do not need a 'top of the line' soundcard, most any will do.
-----------------------------------------------------------------------
Bill Frantz | Security is like Government | Periwinkle
(408)356-8506 | services. The market doesn't | 16345
Englewood Ave
www.pwpconsult.com | want to pay for them. | Los Gatos,
CA 95032
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
