Take a look at this GPSDO
<http://www.force12inc.com/products/gps-locked-precision-frequency-reference-low-jitter-gps-clock-450-hz-to-800-mhz-output.html>.
Needs 13-15 VDC and a powered GPS antenna, but it is plug and playon any
frequency from 450 KHz to 800 MHz, with software-adjustable output level.
73, Pete N4ZR
Download the new N1MM Logger+ at
<http://N1MM.hamdocs.com>. Check
out the Reverse Beacon Network at
<http://reversebeacon.net>, now
spotting RTTY activity worldwide.
For spots, please use your favorite
"retail" DX cluster.
On 3/9/2016 12:37 PM, Gary Smith wrote:
I ordered the K3EXREF and thought it was the oscillator itself which
would provide the external signal source to the K3s. I thought this
was all I was going to need but I see now that is not the case.
Looking on the Elecraft order page, they don't sell a reference
source.
What external 10-MHz reference signal source might I find get that is
not terribly expensive that will do the proper job and allow me to
get this working?
Thanks & 73,
Gary
KA1J
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
