I didn't get much of a response to my first request of help so I thought I'd try again.
I have spent most of the day checking and re-checking and am not making any headway. I am building a K2 and everything has been going fine until the "PLL Reference Oscillator Range test". Pressing the Band+ switch does not change the PLL reference display (12113). The Band- switch changes the reference display to 12067. Pressing the Band + switch again displays the PLL reference freq. of 12113. I looked for bad solder connections, incorrect or missing components and could not find any. Pressing on with the alignment process I found that the "BFO range test" gave similar results. In this case neither the band+ nor the band- displayed the BFO range. The display stayed at 4912 khz. Any Ideas? Dave N1IX _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
