Make sure VOX is enabled while in CW mode on the KX3. 73,
Eric elecraft.com _..._ > On Mar 16, 2016, at 11:17 AM, James Griffith <[email protected]> wrote: > > I have a Logitech K400 keyboard wireless adapter plugged into my PX3. The > keyboard transmits to the PX3 screen. Tapping Control T and the CW message > transmits, you can hear it on the KX3 CW monitor. The power is set to 5 watts > so the rig is not in practice mode. The problem is the KX3's red LED does not > show transmitting, and there is no power out, but the message does play. > Looked through the menus for some type of TX keying recognized from the > keyboard but found nothing. Anyone with keyboard experience. The PX3 and KX3 > have the newest software upgrades. Just hit me, I did not try the VOX. Thank > you, WA7NDD > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
