Hi all, And speaking of the K2... I can't recall if I asked this several years ago on my first K2 build when I was contemplating this exact same question the first time, :), and I couldn't find this specifically in the reflector archives either.
Are there any specific tools for building/aligning/testing the KPA100 _other_ than the ones listed in the manual that are either required or very strongly suggested? I may go QRO in my now-being-built K2 but have rejected my "plan A" of an external amp. So may do the KPA100. It looks like a wattmeter is almost mandatory, but are there any other alignment tools needed? I have a 100W dummy load, will get a large batt (that I'll use with it /p) and have a DMM. And the compliment of tools spelled out in the manual which I'm using to build the K2 to start with. tnx es 73, LS W5QD -- View this message in context: http://elecraft.365791.n2.nabble.com/KPA100-tools-tp7615415.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
