From: http://www.elecraft.com/KX3/KX3_software.htm
MCU 2.38 POWER OUT NOW 15 WATTS MAX, 80-20 M: On 80-20 meters, the PWR control can now be set as high as 15 W (max is still 12 W on other bands). Supply voltage must be over 12.8 V on key-down as indicated by the KX3’s voltage display (tap DISP, rotate VFO B). Note: The KX3 will automatically reduce power as required if current, SWR, or temperature is excessive, or if supply voltage is too low. If a band other than 80-20 m is selected, power output will be cut back to 12 W max. It must then be manually set above 12 W after switching to 80-20 m. Odds are it's the Voltage: this is what I usually run into. On Tue, Mar 22, 2016 at 2:25 PM, Tomy Ivan via Elecraft < [email protected]> wrote: > Does anyone know what firm ware upgrade allows 15 watts for the KX3?I > thought I had upgraded with the latest but still have 12 watts output 73! > Tomy KF7GC > AZ STM > NM AZ Section Net > ORS, www.atenaz.net > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
