Hello, I have removed the "Split +1" macro, and replaced it with a Split-5 macro. This now gives both Split +, and Split - macros...
the new Macro is as follows: BW0001;SWT13;SWT13;FT1;DNB7;RT0;XT0;#SPN000060;#RCF-002500;BW0280; BW sets bandwidth to as narrow as possible... SWT is the same a pressing A->B twice FT1 puts things in split mode DNB7 is down 5, (really it is) RT/XT clear XIT, and RIT SPN sets span to 6 KHz. RCF- moves the DX frequency to the right side of the P3 display BW sets the RX bandwidth back to 2.8 KHz. This is also a slight change from the original macro... This version gives a narrow transmit marker, as opposed to the wide one of the early days... Adding the BW commands at the start and finish perform this function. The change occurred to macro 38 in the spread sheet... The spread sheet can be downloaded at: http://nk7z.net/adding-an-external-keypad-to-the-k3/ 3/4 of the way down, under the heading "A few hints", is a link to the spreadsheet. -- 73's, and thanks, Dave (NK7Z) For software/hardware reviews see: http://www.nk7z.net For MixW support see: https://groups.yahoo.com/neo/groups/mixw/info For SSTV help see: http://groups.yahoo.com/neo/groups/MM-SSTV/info ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
