Never mind. The schematic says nothing is connected to pin 5 or 6.
Kevin.
On 3/30/2016 2:14 PM, [email protected] wrote:
I have successfully removed the KPA3 module and find one pin missing.
On P68A pin # 6 is broken or cut flush with the header. The
corresponding socket opening seems to be filled with a plug. Since I
am not seeing any broken pin in the socket I think this is the way it
was designed. But as long as I have it open and the problem is power
out I may as well ask what is most probably a silly question.
Any takers?
73,
Kevin. KD5ONS
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
