I'm starting to explore other options with different software and my K3s. My main interest is in being able to send CW, RTTY and it would be a nice plus to send from the voice memories when calling in a pileup and not have to keep hitting the function button every time I put out my call.
Seeing as I have the K3 Utility already working, I have found the terminal seems to work well for the immediate needs on CW. I do though have to run it separately from my logging program because the only port that is available is #8 and that is dedicated to the K3 and the logging program takes ownership of it. Once I make a contact I have to shut off the utility and load the program to get it logged. Then if I want to use the terminal I have to do it all over again. I tried to use OmniRig to run the K3/logging program and the Elecraft Utility but see no way to share the utility with it. - Is there another software to use the terminal with the K3 at the same time? Maybe another method? Right now I'm trying not to add more hardware. - Also, I tried to use the memories in the Utilities terminal for RTTY but could not get RTTY to work. I'm sure I missed something I need to change in the configuration but if so, I don't know what it is. Suggestions? Thanks & 73, Gary KA1J ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
