Clay, I can run an EZNEC model for you if you give me some more info about the loop. You said about 45 feet high and assume square. Did you want to feed it in the middle of one side or at the corner? I will model above average ground conductivity just to keep all my analyses consistent.
I can then put the results in SimSmith and spit out all the data you'll need, complete with any transmission line and length and complex impedance including efficiency across the whole HF frequency band. Myron WVØH Printed on Recycled Data > On Apr 2, 2016, at 7:45 AM, Clay Autery <[email protected]> wrote: > > Does anyone have any information or a link to information data on an 80 > meter loop's complex impedance and VSWR values across the HF bands? > > R, X, VSWR from say 3.5-30MHz or better 1.0-54 MHz, measurements taken > at the loop ends with a short jumper, not a long feed-line. Preferably > with loop elevated above 45 feet or so. > > -- > ______________________ > Clay Autery, KG5LKV > MONTAC Enterprises > (318) 518-1389 > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
