Rich, Rather than attempting to walk you through the steps to bypass the KDSP2 (it is in the KDSP2 menu which is kicked in with the DISPLAY button, not AFIL). I suggest you drag out the KDSP2 manual and follow the instructions to put it into bypass state. Actually, I never remember the exact sequence myself, so I just look it up when I need to do it.
73, Don W3FPR > -----Original Message----- > > Old age must be kicking in :( > > I originally aligned the K2 using Spectrogram and it worked great. > > I am doing a realignment and am lost. > > I am running a DSP unit and it appears that Toms instructions say that if > you are running either DSP or Audio options you need to turn the > AFIL off in > the K2 Menu AND set the in/out switch to OUT on the PC board. > > Well to start, I dont see a AFIL in the K2 menu and dont see any > switches, > jumpers, etc on the DSP board. > > What am I missing? > > Thanks and 73, > Rich > kd0zv > > > _______________________________________________ > Elecraft mailing list > Post to: [email protected] > You must be a subscriber to post to the list. > Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/subscribers.htm > Elecraft web page: http://www.elecraft.com > > > -- > No virus found in this incoming message. > Checked by AVG Free Edition. > Version: 7.1.375 / Virus Database: 268.1.0/269 - Release Date: 2/24/2006 > > _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
