Given those symptoms I don't think this is it, but you could try going to speaker+phones and tapping the 1 key to toggle between PH.R SW- and +. Cheers, Fred KE7X
For all KE7X Elecraft books, see www.ke7x.com ________________________________________ From: Elecraft <[email protected]> on behalf of [email protected] <[email protected]> Sent: Tuesday, April 5, 2016 5:39 AM To: [email protected] Subject: [Elecraft] Internal Speaker Update! Here is an update to the internal speaker issue with my K3. 1. If I plug my headphones into the speaker jack in the back I hear audio. 2. But, for #1 to happen the speaker setting in config must be #2. If it is #1, I get no audio. 3. I have even plugged in a new speaker I received from Elecraft yesterday and I still don't get audio from the internal speaker. 4. I am going to send this information to Howard at Elecraft Service to get his opinions on this. 5. Not sure whether the KIO3 board is defective or not. I have never moved or done anything with the board for it to become unseated. Mark Griffin, KB3Z ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
