Jack, did you check for proper operation of the speaker and phones logic as described in the update instructions:
. Hold CONFIG to enter the configuration menu and turn B (VFO B) to locate SPKR+PH on the LCD. . Turn the A (VFO A) knob so no is displayed on the LCD. . Check to see if audio is present in the speaker with phones unplugged. If not tap the 1 switch on the keypad until you see PH.R SW - on the LCD (be sure the - sign is displayed at the end). This is the default setting required with the KIO3B installed that restores normal operation; Selecting no will silence the speaker when phones are plugged in and if yES is selected both phones and speaker will be active at the same time. 73, Ron AC7AC -----Original Message----- From: Elecraft [mailto:[email protected]] On Behalf Of wa9fvp Sent: Saturday, April 9, 2016 9:25 AM To: [email protected] Subject: [Elecraft] K3 Codecs and Remote Desktop After installing the KIO3B, I had no problem passing audio to and from my W7 PC. The speaker and microphone codec appear in the Sound Control panel. When I try to use Remote desktop, the codecs a are gone and there's no sound on my Dell laptop. When I check the Sound Control the only sound device that appears in the Playback tab is a Speaker and the Recording tab is blank. When I check "Play on remote computer" and launch RDT, The Sound Control shows the K3 codecs and I can hear sound on the host computer. Before I launched RDT, at the Local Resources tab/Settings I checked "Play on this computer". Here's my conundrum. For a pan-adapter, I use an SDR-14 software defined receiver from RF-Space. The Spectra-Vue software is compatible with the K3. I feeds off the K3's IF and it functions like the P3 except the spectrum display is on the PC monitor. Within the span it can also serve as a 2nd or 3rd receiver and the audio from each demodulator is fed separately to each speaker. When I use Remote Desktop the audio is passed to my Laptop and when I click on the Taskbar-Speaker icon, the Spectra-Vue volume control is shown. My question is "What is the difference between the Spectra-Vue codec and the K3 codac? Why is the audio available on the SDR-14 but not on the K3. ----- Jack WA9FVP Sent from my TRS-80 :-) -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-Codecs-and-Remote-Desktop-tp7616124. html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
