Hi Tony, I use this macro for split and it works for me:
BW0001;SWT13;SWT13;FT1;UPB7;RT0;XT0;#SPN000060;#RCF+002500;BW0280; BW Sets bandwidth to as narrow as possible... SWT13 Copies the current vreq to VFO B FT1 Selects VFO A UPB7 Moves the VFO A up 5 RT0/XT0 Clear RIT and XIT SPN Sets the P3 span to 6 KHz RCF Offsets the current displayied frequency 2.5 KHz sideways on the P3 screen moving it close to the left side of the display. BW280 Sets the Recieve bandwidth at 2.8 KHz, while leaving the transmit at minimum... I do CW mostly so I want a small vertical line showing transmit frequency. Hope this helps... -- 73's, and thanks, Dave (NK7Z) For software/hardware reviews see: http://www.nk7z.net For MixW support see: https://groups.yahoo.com/neo/groups/mixw/info For SSTV help see: http://groups.yahoo.com/neo/groups/MM-SSTV/info On Fri, 2016-04-22 at 19:14 +0100, Tony G6GLP wrote: > Hi All, > I have noticed a little problem (not much) with the P3 display. I > have > A K3 P3 and vga card set up as per the book and work fine until I go > from normal to split working. I achieve this with a macro on the K3. > The > problem is the K3 goes into split but the display on the P3 and > monitor > doesnt show the split until I move the sub rx and up it pops. Its not > a > problem now I know about it but does anyone else see this or is > there > something I could change to stop it. > If more details are required I can copy out the macro (Not Mine) and > give a blow by low description. > > 73 de Tony G6GLP > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
