Yes. Run one copy of the remote program as the host. On your client machine run the remote program and click “Connect”, put in the IP address and port.
An easier way (though a bit more expensive) is to get a serial port server. I have the Startech 4 port server that connects me to two KPA500 and two KAT500. They appear as normal serial ports on the client and you connect using the remote program. But if you’ve already got the computer on the host end the software is free :^) Ken K6MR From: Michael Walker Sent: Wednesday, April 27, 2016 10:26 To: [email protected] Subject: [Elecraft] KPA500 on a Network I likely have not spend enough time on this, but as I redo my remote base, I am finding that the I have the KPA500 RS232 port on one computer, but I operating on another computer. With its 'hosting' interface, is there a way to have the client software connect to the server software on a totally different IP address on the same network? Mike va3mw ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
