Byron,
There is a latch on the RJ-45 plug - if the plug is inserted
sufficiently, you will hear a slight click when it is fully inserted.
Once latched, it will not fall out.
You may have to move the boot back a bit and push on the plug assembly
itself to get it to latch. Once latched, move the boot back into place.
73,
Don W3FPR
On 5/1/2016 3:08 PM, Byron Peebles wrote:
I continue to be plagued with the radio disconnect azssociated with
the RJ-45 interface on the K3S.
Has anyone ever heard of an RJ-45 Pin Alignment tool? I suspect there
is some physical issue that is not resolved by removing the boot and
everything else that I've tried. Forget about it staying connected if
you move anything on the desk. It just seems like some fundamental
issue, possible with the socket, as manufactured.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
