Unfortunately it's not the plug that gets flogged by the wiggle wiggle wiggle... it's the socket.
\Replacing the socket of a RJ45 in any piece of equipment that has been flogged to death is a little more than most Hams can cope with. The quality of the sockets that most manufacturers use is also questionable, some are nothing more than wire pins bent within a plastic frame, cheap and very nasty. Having fought a loosing battle with Kenwood microphones in my 4WD, I've now replaced the lot with something far more robust that has pins and positive mec mechanical locking, no more plastic clips or bent pieces of wire and my problems have reduces significantly. The RJ45 sockets should stay where they were originally intended in IT racking equipment where they are not disturbed, they are not really intended for use i mobile/portable/high use equipment. 73 Matthew VK5ZM On 2 May 2016 at 14:23, Lynn W. Taylor, WB6UUT <[email protected]> wrote: > Microphone connectors fail eventually, even the well-made ones with set > screws and clamps. > > There is one advantage to the RJ-45 -- it's easy to clip off a little wire > and crimp on a new one. > > Replacing a more traditional connector is much harder. > > 73 -- Lynn > > On 5/1/2016 9:35 PM, Edward R Cole wrote: > >> But the most miserable use is as a mic connector which Motorola went to. >> Now I see many ham radio mfr's copying. Instead of molded multi-contact >> connector with set screw which holds contact tension its just wiggle wiggle >> that poor RJ45. >> > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
