Jack,
What does the FM output look like direct from the K3?
In other words, disconnect the KPA500 and see if the AM problem is still
present.
That will tell you whether it is a K3 problem or a KPA500 problem.
Do not overlook the possibility that it is RF feedback getting into
something. If the problem gets worse with increased power, suspect
RFI. Also working into a dummy load should eliminate the possibility of
RFI. If RFI is the problem, better common mode chokes on your antenna
and tighter feedline connections are the tools to attack it.
Also monitor the AC voltage during transmit as well as the output
voltage of your power supply. If one or both sag substantially, that
problem should be fixed first - for the AC side, better wiring to the AC
receptacle (dedicated circuit), and for the power supply output, either
tighter connections or larger wire, or there could be an internal
problem in the power supply.
73,
Don W3FPR
On 5/3/2016 6:17 PM, wa9fvp wrote:
When operating 6 meter FM I'm seeing amplitude modulation on my K3. I have
the all the upgrades including the KIO3B and the KSYN3A. Into a 50 ohm load
at 200 watts the KPA500 peaks at 300 watts. I disconnected the IO cables
including USB but nothing changed.
-----
Jack WA9FVP
Sent from my TRS-80 :-)
--
View this message in context:
http://elecraft.365791.n2.nabble.com/Amplitude-Modulation-on-FM-tp7617137.html
Sent from the Elecraft mailing list archive at Nabble.com.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
