Hi all, so I just got back in town last night, and I wanted to get my
new KIO3B installed in s/n 1544 so I could give it a run during 7QP.
Assembly went smoothly enough and the "Y" cable to the P3 seems to be
doing its thing just fine.
But my Windows 10 computer isn't talking to the K3 or the P3 anymore.
Device manager sees both the sound card and the serial port (assigned to
COM5) but neither the K3 utility or the P3 utility (both latest
versions) can talk with their respective equipment. They just cycle
through all the baud rates trying to make a connection (I checked and
both K3 and P3 are set to 38400).
What have I missed? I checked all the firmware revisions before
starting and everything looks just fine. I double checked the position
of the slide switch on the I/O board before closing the radio up. Any
ideas? I would hate to have to tear it all apart again tonight just to
get on the air for the contest tomorrow, but it's starting to look like
that's my answer. Please copy me on any replies because I get the
digest version of the reflector and it'll be a while before another one
comes through.
Thanks everyone!
73,
Steve
AD7OG
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
