Hi Bill, No, no external monitor is used... You should see a message pop up on the P3 screen, indicating a USB device has been plugged in, when you plug in a keyboard. If this does not happen, and you are sure you are using a dumb keyboard, not a multimedia keyboard, then something is either not set up correctly, or broken. If setup might be the issue, look in Cady's book, if broken, give Elecraft a call... It has been too long for me to remember if setup can break this...
-- 73's, and thanks, Dave (NK7Z) For software/hardware reviews see: http://www.nk7z.net For MixW support see: https://groups.yahoo.com/neo/groups/mixw/info For SSTV help see: http://groups.yahoo.com/neo/groups/MM-SSTV/info On Sun, 2016-05-15 at 09:28 -0400, Bill wrote: > I installed the SVGA board in my P3 and am unable to access the > terminal > mode. In effect, the P3 operates as it always did prior to the SVGA > installation - nothing is new. I have installed the latest firmware > - > for the entire station. > > I only bought the SVGA for macro uses - hence, did not plan to have > an > external monitor installed. Is an external monitor required for this > purpose? > > Thanks, > > Bill W2BLC K-Line > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
