The easiest way I've found to reroute signal lines in these sorts of cables is to build a little "adapter" of back-to-back DB shells (9, 15, 25), one male and one female, separated by a pair of 1" 4-40 hex standoffs. You then wire between the shells whatever pinout changes you need. Relatively straightforward and doesn't wreck the original cable. That's how I did it on my setup (identical to yours). > > > Message: 21 > Date: Sun, 15 May 2016 11:43:05 -0400 > From: Art <[email protected]> > To: [email protected] > Subject: [Elecraft] KPA500 with K3/0 and remote rig > Message-ID: <[email protected]> > Content-Type: text/plain; charset=utf-8 > > Hi all, > > > Interested in using the KPA500 via remote. K3/0 manual states that a simple > mod to the KPAK3AUX cable is needed. > > > However, this cable from factory has a molded shell on both ends. Anyone > figured out how to access it to make the wiring connection needed? > > > Thanks. > > > Art KZ5D > > > ------------------------------ > >
______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
