I have a DirecTV system and haven't had as good luck with RFI as the others here. My dish is about 40 feet directly below and near the end of an OCF 80m Windom. It worked out that was the only realistic position that afforded full Sat views through the trees.
Usually nothing happens at 100w HF output, but when I run the power up to 500w (depending on band), two of my DVRs either "turn off" (standby really) or start randomly recording whatever channel is being tuned at the time. I've got the dish grounded and the RG6 feed is passed multiple passes through large #31 ferrites, with no overall improvement in RFI. I would recommend much more separation of antennas and feedline than I have, if possible. Warren, KD4Z On 5/17/2016 10:08 PM, w9hak <[email protected]> wrote: I am contemplating dropping TWC and going to a satellite system. Any advise on rfi would be appreciated. Smith Bradford W9HAK ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
