Yes Bill, I believe that is correct but I want it to band follow so that the solution will be set to the last correct solution for the current frequency when only receiving. It follows the K3/KPA500 and the the question is “how do I implement this with the KX3?
Michael Blake > On May 19, 2016, at 12:24 PM, Nr4c <[email protected]> wrote: > > I believe it will sense RF on a dit or two. So only the coax is required. > > Sent from my iPhone > ...nr4c. bill > > >> On May 19, 2016, at 11:06 AM, Michael Blake <[email protected]> wrote: >> >> Which data connection(s) do I use to control the band/frequency settings on >> the KAT500 when the transceiver is a KX3? The amplifier is a low drive >> modified ALS-600 which seems like a straight forward keying connection but I >> am not sure about the data connection from the KX3’s E980232 "Cable Adapter >> 6” RCA & 3.5mm”. >> >> Stated differently which interconnecting cables do I need to order to cause >> the KAT500 to frequency track the KX3? >> >> Michael Blake >> >> >> >> >> >> >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[email protected] >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> Message delivered to [email protected] > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
