Wes - "with minor radio modification" -well, that's kind of my question - exactly what does that entail, and how many screws do i have to unscrew to get there? Bob - W3DK
> -----Original Message----- > From: Elecraft [mailto:[email protected]] On Behalf Of Wes > Sent: Saturday, May 21, 2016 2:43 PM > To: [email protected] > Subject: Re: [Elecraft] Powering a k-pad from a K3S > > In the original announcement from Wayne: > > * flexible power source: rear 12-V jack on the radio, DC barrel jack, > USB port, or even through the 6-pin data cable, with minor radio modification > (the latter method results in a single cable to the K-Pod for data and power) > > On 5/21/2016 11:35 AM, Bob Novas wrote: > > Say, just for the sake of the argument, that I were to purchase a > > K-pad. If I want to power it from the K3S over the cable connected to > > the plug on the bottom of the K3S, do I have to modify the K3S to get power to > the K-pad? > > If so, how much do I have to take apart? Would it make any sense to > > purchase any other stuff at this juncture because the K3S is going to be > > apart, like the KDV3? Thanks, Bob - W3DK > > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html Message > delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
