On 5/26/2016 3:14 PM, Richard W Hemingway wrote:
I have a K3S
which I think is great, however, I have a problem. I mostly
operate PSK. I do this through fldigi in a computer (Mac) and with
SignaLink USB. However I have been unable to TX to the K3S with
Fldigi (also with Coco Modem).
Why are you using SignaLink, and not the built-in USB sound card in the
K3s? I sold the SignaLink I used with a KX3 when I bought the K3s a
couple of months ago.
I use FLDigi with the K3s sound card, and it works perfectly. The only
thing I need to do is remember to hold the VOX button to turn on VOX, so
the xmit audio keys the transmitter. My MENU: VOX GN is set to 10.
Tap MODE to select DATA. For PSK-31 (vs. RTTY), be sure to hold DATA MD
and select DATA-A, not AFSK-A, with the VFO B knob.
Adjust the MIC knob for LINE 5 input level.
I don't recall setting any audio level for the USB sound card, but that
can be set in FLDigi (I think).
Hope this helps.
--
73, Mike N4CF
Louisa County, VA USA
Elecraft K3s/100
Carolina Windom up 45'
http://n4cf.mdodd.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
