The latest KX2 beta firmware can be found at: http://www.elecraft.com/KX2/kx2_software.htm
We recommend that all KX2 owners load this revision. The package includes DSP rev. 1.46, which corrects a possible error condition. The error would be indicated by an "ERR DSP" or "ERR DSE" message on the display, odd S-meter behavior, or other symptoms. The condition is rare, but it could be inconvenient if it occurred in the field. The other reasons for this release are given below. Please see our KX2 software page (above) for instructions on loading beta releases. If you'd rather wait until it becomes a production release, no problem; that will probably happen very early next week. 73, Wayne N6KR * * * KX2 MCU 2.61 / DSP 1.46, 5-31-2016 * MONITOR LEVEL CONTROL GRANULARITY IMPROVED. * AF GAIN CONTROL GRANULARITY IMPROVED. * AUDIO-CW USER INTERFACE IMPROVEMENTS: The KX2 can emit CW characters when switches are pressed and knobs are turned, etc. Audio-CW tones can be enabled in the menu (see MENU:SW TONE), or on power-up, by holding APF along with RATE and A/B. Release RATE and A/B first, then release APF. This sets the speed to 20 WPM. The menu entry provides more speed selections. For further details, see the document, “Elecraft KX2 Physical Description and Audio-CW User Interface.” (You'll find a link for this in the release notes for beta rev. 2.61, on our KX2 software page.) ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
