Admittedly, I am a new owner of the K3s and am still learning my way
around it. I bought it mainly for use an IF radio for my DEMI 2 mtr
xvtr, which I use for EME work. It came highly recommended as one.
Prior to the K3s, my EME workhorse radio was a Kenwood TS2K which
actually worked "fine" but as most are. I am always looking to
improve my station. I used a RigBlaster as the sound card interface
with the computer used.
I am using the USB port for everything - audio in/out, PTT, CAT
control, etc. along with some VSP software. I also run a splitter on
the RX line from the EME array with one side going to the DEMI xvtr
and the other to a FuncubePro+ dongle. The K3s feeds WJST and the
FCD+ feed MAP65, running side-by-side.
Trying NOT to drag this out too much longer, it seems to me the
K3s/DEMI setup simply doesn't decode as well as the TS2K did (does?)
and I'm wondering if anyone has real world experience in comparing
how well the USB audio method versus the IN/OUT and the Rigblaster
interface to the computer's soundcard. The FCD+ decodes MUCH better
than the K3s/DEMI setup as I currently have it whereas the TS2K
seemed to be better on the weaker signals.
Maybe I just don't have something setup correctly.....
TIA
Ken
------------------------------------------------------------------------------
President and CTO - Arcom Communications
Makers of repeater controllers and accessories.
http://www.arcomcontrollers.com/
Authorized Dealers for Kenwood and Telewave and
we offer complete repeater packages!
AH6LE/R - IRLP Node 3000
http://www.irlp.net
"We don't just make 'em. We use 'em!"
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
