Can you decode RTTY signals? If not, get that working as a first step.
Is the soundcard device selected in HRD the same one that is connected
to the K3 Line-In and Line Out jacks? The soundcard LINE OUT (or SPKR)
should connect to the K3 LINE IN.
Do you have the computer soundcard output level sliders set to 75% or
greater?
Set the MIC SEL in the K3 menu to LINEIN.
Adjust the K3 "MIC LEVEL" (actually the Line-in level) so you have 4
bars solid with the 5th bar flashing on the ALC meter.
Turn on VOX and it should transmit.
73,
Don W3FPR
On 6/19/2016 10:00 PM, Richard Vincent wrote:
I recently purchased a new to me K3 which I am in the learning curve. I am
trying to get the K3 to key RTTY in AFSK mode and not having any luck. I have
Fred's book and have followed the steps with still no keying. I am using
DM-780. VOX is on, sound set correct (I think). Anyone have any idea of what I
am missing? I would like to get this working for FD.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
