Roger,
It may be that the driver IC for the LEDs has been damaged. There is 5
volts on the LEDs, but the driver IC has to bring the other lead near
zero volts to light the LED.
If you did not work on an anti-static mat when doing the connector
change, that may be the blame.
But just the same, re-check the soldering on the connectors you changed.
73,
Don W3FPR
On 6/23/2016 5:28 PM, Roger D Johnson wrote:
The rig with no front panel LEDs working is a K3.
I do have 5 volt power to the LEDs.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
