Thanks Don,
That is exactly the info I was looking for. I had shipped mine back,
w/o xformer, for a repair last year but wondered how does Elecraft ship
Factory built units.
Ralph W1ZK
On 6/25/2016 8:26 PM, Don Wilhelm wrote:
Ralph,
When a KPA500 is shipped for service, they recommend that the
transformer be removed.
It not only saves on weight, but it eliminates the possibility that
the transformer will deform the bottom panel should the parcel
experience a sudden stop such as at the end of a sorting chute.
Elecraft does ship the factory KPA500 with the transformer installed.
*However*, they use special extruded packing supports.
If the person you would buy from has the factory packaging for a
KPA500-F (or a K3-F), then it can safely ship using that packing and box.
If that packing and box is not available, I would suggest that a piece
of plywood cut to the same size as the KPA500 be placed directly under
the KPA500. I normally suggest that packing peanuts are good for
protection, but not for that much weight because the peanuts can be
crushed, at least 2 inches of bubble wrap on all sides would be
better. Do not use the large air bags, they can burst.
The secret to good packing is to pack the object so it cannot move
within the box.
73,
Don W3FPR
On 6/25/2016 8:01 PM, Ralph McClintock wrote:
What does Elecraft recommend for shipping a built KPA-500? Do
KPA-500F amps ship with the xformer installed? Not selling mine, just
wondering about buying a used one!!
W1ZK
--
Secretary USS PUEBLO Veterans Association
Life Member American Ex-Prisoners of War
Life Member Disabled American Veterans
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
