I tend to use 500 hz cw tone because it is easy to setup other apps with that.
Also, one of the tricks I use for less noise is setting the RX EQ with everything to lowest setting EXCEPT 400 hz. I set 400hz +1. Try it, you might like it. For SSB the RX EQ audio is flat. I then set TX EQ audio with everything below 400 hz at -3, 400 hz flat, then everything above 400 hz +8 or greater. Your audio will punch through pileups. Mic gain using Heil or Elecraft mics are set to high bias with mic gain at 27 +/-3 and compression 26+/-3 watching the ALC to 4-5 bars. For AM and FM audio is set flat. I play with AM some depending on Heil mics used. I get great audio reports all over the world. 73 Doug NA1DX ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com