> I do not see it as being available on the Elecraft site.
See KAT3A Internal ATU here:
http://www.elecraft.com/elecraft_prod_list.htm#k3
Also I wanted to install the KIO3B board with USB and the board that
> has the 12,10 and 6 meter preamplifiers on it, which is standard on
> the K3S. Are these boards not possible to be installed on a K3?
See "KIO3BUPKT KIO3B Upgrade Kit for K3"
and "KXV3B RX Ant., 2nd Pre-Amp, IF Out and Xverter Interface upgrade
for earlier K3 radios" here:
http://www.elecraft.com/elecraft_prod_list.htm#k3
73,
... Joe, W4TV
On 6/29/2016 10:35 AM, todd ruby wrote:
I have a self assembled K3 and at the time I did not want to get the board that
had the second SO-239 antenna port but now I do. I do not see it as being
available on the Elecraft site. As a matter of fact there is little in the way
of further K3 hardware support.
Also I wanted to install the KIO3B board with USB and the board that has the
12,10 and 6 meter preamplifiers on it, which is standard on the K3S. Are these
boards not possible to be installed on a K3?
Thanks to all
todd
WB2ZAB
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
