Sri, my quick comment is misleading. It comes off as I described but on the MH3 the bushing is really a nut pressed into a plastic opening on the inside of the case back. If you apply any pressure to the screw while removing it, you can push the nut out of position and so you'd have to open the case to put the hanger back on, so be careful.
Getting to the threaded bushing inside involves opening the case and removing the pc board. Not hard, but fussy to do. 73 Ron AC7AC -----Original Message----- From: Elecraft [mailto:[email protected]] On Behalf Of Peter Pauly Sent: Wednesday, June 29, 2016 12:48 PM To: Elecraft Reflector Subject: [Elecraft] Remove metal hanger from MH3 microphone? Can the piece of metal on the MH3 be removed by taking the microphone apart? I doubt that I'll ever use it and the chances of it scratching my radio faceplate are very high. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
