I thought I would close the loop on this issue. It turned out that my "fix" last Fall was just a partial or temporary fix and the BFO did, in fact, continue to drift. So, I finally went ahead and did the procedure which you recommended, which I hesitated to do at the time. I removed L33 and reflowed the solder for the two BFO crystals. It turned out that removing L33 was actually straight-forward ... or maybe I'm just getting better at this. It just took good magnifiers and a little patience.
In any case, this seems to have fixed the problem. The "center frequencies" moved back to about where they were when I first built the K2 and receiver performance has been restored. Thanks again for the advice. Best - Bruce K1FFX ----- Bruce Rosen K1FFX K2/100 6982 KSB2 KAT100-1 -- View this message in context: http://elecraft.365791.n2.nabble.com/K2-K2-filters-continue-to-drift-out-of-alignment-tp7609910p7619558.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com