(I put the Kx3 in USB, hit data and set it to 45baud AFSK A and decodetext.)
You are *inverted*. Select AFSK_A instead of USB - that will put you into *lower sideband mode* which is the traditional "sense" for RTTY. AFSK traditionally uses 2125/2295 Hz tones (or 1275/1445 Hz) with the lower tone (*higher* RF frequency) representing MARK. The *only time* one would use USB is if using *brain dead software* written by a programmer who has no concept of tradition and is *too lazy* to provide the option to use LSB. However, if you are using the internal encoder/decoder in an Elecraft transceiver use AFSK_A. 73, ... Joe, W4TV On 7/3/2016 4:51 PM, Doug Millar via Elecraft wrote:
Hi, Even following Kady's book, I can't get the KX3 to decode RTTY this weekend. Does anyone have hints on the setup? (I put the Kx3 in USB, hit data and set it to 45baud AFSK A and decode text.) With lots of tuning, I get gibberish. S meter is in dual peak mode. Thanks for any help. de Doug K6JEY ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
