Hi Group, I have a P3 connected with VGA and TXmon to my K3.
Before this P3 i used a SDR-IQ connected to a computer and if-out to the SDR-IQ, because of the computer noise and the slow starting of windows etc etc, i wanted a P3 this is now perfect. It works nice, but my waterfall display is very unclear it not like i was used to, is there a way to change that ??? It’s unclear on the P3 and on the VGA monitor which is 21” so it should be ok. Next to that is it so that i was used to when i turn my dial of my K3 that the display changes immediately (i was able to tune in to a station with the display) with the P3 there is really a noticeable time between turning and moving of the display. Is this normal or should i change some settings in the P3 or the K3. All software is the latest of elecraft. William Pe1bsb ------------------------------------------------------------------------------------------------------------------ Pe1bsb William lagerberg Stommeerkade 65 1431 EL Aalsmeer E [email protected] —————————————--------------------------------------------------------------------------------------- This email may contain confidential and privileged material for the sole use of the intended recepient. Any review or distribution by others is strictly prohibited. ------------------------------------------------------------------------------------------------------------------ ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
