Thanks Wayne! That did it. I don't know how I missed that command string. This phase of the K3S is all pretty much Greek to me, and I've read over the programming manual several times trying to absorb it all before experimenting. After a year of pushing buttons and turning knobs, I am finally writing commands for functions I use most and want a one touch button to get there fast.
Thanks again and 73 Gene, N9TF To set a specific RIT/XIT offset, you can use the RO command. From the programmer's reference: SET format: ROsnnnn where s is +/- and nnnn is 0000-9999. s can also be a space in lieu of +. 73, Wayne N6KR On Jul 7, 2016, at 7:07 PM, "Gene Gabry" <[email protected]> wrote: > Hi > > > > I'm finally diving into setting up command macros, and most are successful. > I thought there was a way to not only turn on XIT, but to also be able > to set an up or down offset. I've tried several different command > combinations, but no luck. XIT turns on but no offset. > > Is there not a command string that turns on XIT and allows an UP or DN > offset? > > > > Thanks > > > > Gene, N9TF > > > > K3S 10057 > > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net Please help support this email > list: http://www.qsl.net/donate.html Message delivered to > [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
