> I'm using it with a K3, S/N 8019 with software version 5.38.
As previously documented, the KPOD requires firmware 5.50 (beta) 73, ... Joe, W4TV On 7/9/2016 9:14 AM, Rick wrote:
I received my new K-Pod yesterday, and I connected it this morning. But the tuning function doesn't work. Can someone suggest what I am doing wrong? I'm using it with a K3, S/N 8019 with software version 5.38. I am powering it from the 12V connector on the back of the K3, since I have not done the mod to power it from the data cable. The data cable is connected too of course. The "on" light turns on as well as the D1-D3 LEDs as I switch the rocker switch to different positions. But the VFOA, VFOB and RIT do not change as I turn the knob on the K-Pod. I thought there might be a menu entry to enable it, but I don't see anything like that. Even though it looks like it's powering on OK, do I have to do the mod anyway? Any other suggestions? 73, Rick K0XB ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
