> There has been mention of future software and interfaces for the PC. Will
there be any kind of
> programmer’s manual available to the public?
+1 on the K-Pod programmer's manual. Good call, Ron.
I assume Ron is looking for a definition of the interface / protocol between
the K-Pod and K3 / K3s.
I believe the K3 / K3s "J3" connector leveraged by the K-Pod was originally
intended to serve as a MPLAB ICD 2 (In-Circuit Debugger),
http://wickedstone.com/KF5WBO/ICD-2%20Schematic.jpg
http://wickedstone.com/KF5WBO/MPLAB%20ICD%202.jpg
http://ww1.microchip.com/downloads/en/devicedoc/51331b.pdf
With respect to future software and interfaces ...
The owner's manual states, "Future firmware for the K-Pod that can be
downloaded from www.elecraft.com will allow you to control your personal
computer from the K-Pod through the USB interface. Your computer will
recognize the K-Pod as a human interface device such as a keyboard or
mouse."
The HID protocol is well-defined.
For now, let's see if we can get Elecraft to share the interface / protocol
between the K-Pod and K3 / K3s.
73's
Joe Stone
KF5WBO
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K-pod-tp7619885p7619897.html
Sent from the Elecraft mailing list archive at Nabble.com.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
