My experience with Elecraft text decode is: 🚨 turn on cwt 🚨 tune station carefully, SPOT is your friend here 🚨 set threshold to 2 or 3 and be sure that the bar is flashing in step with the code, adjust threshold until it does. 🚨 if can get above set threshold one higher and reduce RF Gain
Sent from my iPhone ...nr4c. bill > On Jul 17, 2016, at 5:25 PM, Hajo Dezelski <[email protected]> wrote: > > Hello, > > comparing these two rigs in the mode "text decode" I had the > impression that the Kx3 did a better job. But this could be triggered > by different settings. > > Is the software implementation of the thresholds 1-6 when adjusting in > both rigs identical or do they differ? > > If they differ what would be comparable settings? > > 73 de > Hajo dl1sdz > > --- > Cela est bien dit, mais il faut cultiver notre jardin. > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
