Is "Sound Loopback" set to "Int" on the MMTTY Config | Misc tab *and* TX Port set to "Sound + COM-TxD (FSK)? That should allow MMTTY to monitor transmission regardless of the transceiver in use.
I'm not sure that all versions of the K3/K3S firmware echo "Monitor" to the Line Out. Is Monitor enabled (Mon level = 8 to 10 at least) on the "newie's" K3? 73, ... Joe, W4TV On 7/16/2016 9:08 PM, Jamie WW3S wrote:
Trying to help a RTTY newbie setup his Microkeyer II to his K3, we had everything working in NAQP except whatever he sent was not visible in the digi window of MM+. We noticed it scrolled by in the microkeyer window, but a nusiance to try to keep your eyes on the screen and the keyer......I noticed a post about the recent K3 firmware, but Ed doesn’t have that installed in his K3.....is there a setting or something we missed? With my microkeyer, I didn’t have to do anything, what I sent was automagically captured in the digi window..... 73, Jamie WW3S ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
