Mike,
Since you moved the filters in the KRX3, you may want to go into the
CONFIG menu and tell it which filters for the KRX3 are installed and in
which slots.
73,
Do W3FPR
On 7/19/2016 8:06 PM, Mike Murray wrote:
After removing one filter from my subRx and moving the remaining filter
(2.8) to position #1, I'm now getting and ERR BP3 on start up. Before I
open everything up again and remove the KRX3, SUBIN and SUBOUT boards and
reset everything as detailed in the manual, is there anything else I should
be doing to troubleshoot? It's obviously a problem with the SubRx, but I
thought I was being ultra cautious during the disassembly/assembly process,
including use of static protection precautions.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
