I run a SteppIr with my KX3. The KX3 will send out its current frequency via ACC1 so the SteppIR can automatically change bands. I have a splitter going from the PC to the SteppIR and the KXPA100 (which eventually chains to the KX3 via my PX3).
It all works just fine. If the SideKar sends data on the serial port at the same time as the PC or KX3, then that could be a problem. For the SteppIR, it is a listen only device. Works just fine. Joe KO8V > On Jul 21, 2016, at 9:27 PM, stanley frady via Elecraft > <[email protected]> wrote: > > I want to know if the KX3, PX3, etc ACC1 can be broken out to go 2 devices > such as a PC or Sidekar. Appears to me to be a serial network like > Icom's CV system. > > Thanks, > Stan > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
