Same exact issue here. The P3 screen also became slow to refresh, like once every 5 seconds. Turn K3 and P3 off/on solved the issue. This only happened after a screen capture.
Charles, K4ZRJ > On Jul 28, 2016, at 8:02 AM, w4sc <[email protected]> wrote: > > I had this issue also. The “0” reading appeared after making and saving a > couple of screen captures. Recycling the power on the P3 did not correct. > Closing the “COMM PORT” and reopening did correct it. I have had other > issues with this connection to the P3 through the K3S USB connection. > > Ben W4SC > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
