Are you using VOX to trigger transmit? If so you might try different VOX GAIN settings.
72, Brian, K0DTJ > On Jul 30, 2016, at 09:47, James Bennett <[email protected]> wrote: > > I have a KX3 and am running FLDIGI 3.22.01 on my Raspberry Pi 3. Everything > works… except for one annoying thing and I’m trying to find out if this is an > FLDIGI issue or something I need to tweak on the KX3. > > When I fire off a macro such as a CQ message, the rig goes into transmit as > it should, sends the text in the macro as it should, but never returns to > receive: the red TX light on the KX3 stays on, although the RF output ceases. > I have to manually “tickle” the KX3 XMIT button to get the radio into receive > mode. Here is a sample macro text I’ve been using to get this resolved: > > <TX>Testing testing de w6jhb w6jhb k<RX> > > Seems pretty darn basic, but in my case, basic isn’t getting the job done. > Anyone else with a KX3 and FLDIGI know what I need to do to get this working > w/o having to reach up there and press that XMIT button to get back to > receive mode? > > Thanks, Jim / W6JHB > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
