Bret,
You have to adjust the MON setting to hear your audio through your
headphones.
Is MON set to zero? Hold the CMP/PWR knob to get to the MON setting.
73,
Don W3FPR
On 7/31/2016 11:45 AM, MaverickNH wrote:
I'm trying this on my K3s, which appears to have the same capability.
I have Heil ProSet K2/K3 headphones installed and configured as instructed
(1/8" plug to gray AD-1-K adapter jack and 1/4" plug to K3s PHONES jack,
with adapter plugged to K3s MIC, and menu MIC SEL set to FP.L bI AS on.
With MIC Gain set to 23, I see red TX LED light continuously as I speak, in
normal TX mode. With TX TEST selected, the red LED does not slowly blink,
and I can see the ALC meter register 5-6 bars, but hear nothing through my
headphones.
No doubt I am missing a setting, eh? I appreciate the help!
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
