Pete,
Fine that you are using an FTDI USB to serial adapter - but what is the
connection from the DE-9 conncetor on that adapter to the KX2. If it is
the KXSERa cable, then it should work fine, but if you have wired your
own DE-9 to 3.5mm cable, then check it to make certain it has the
correct connections and has continuity on all 3 of the used conductors.
In other words, if you have made your own Serial to KX2 cable, check it
first.
Set the KX2 RS-232 to 38400 and use KX2 Utility to attempt to connect.
73,
Don W3FPR
On 8/3/2016 5:18 PM, Pete Jones wrote:
I am using an FTDI cable (not Elecraft KXUSB). Windows 10 recognises
it and the FTDI driver is installed. The KX2 utility app sees it as
Port COM4 but fails to connect at any speed.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
