Thanks folks.
Problem solved!
JimW7JHR
Sent from Yahoo Mail. Get the app
On Thursday, August 11, 2016 5:15 PM, Don Wilhelm <[email protected]>
wrote:
Jim,
ANT1/ANT2 is a per band setting. If you have not set the antenna port
to the antenna you are using, then the antenna selected could be random.
Go to each band and set the antenna to whichever antenna is connected,
then test the behavior by switching from band to band.
If you bought the KXAT100 and KX3 used, the prior owner may have had
specific antenna selections set per band - if you bought it new, it may
just be a matter of initializing things.
73,
Don W3FPR
On 8/11/2016 7:32 PM, Jim via Elecraft wrote:
> My KXPA 100 is switching from antenna 1 to antenna 2 on its own when I go
> from band to band on the KX3. Anybody know what could be causing this?
> Also, I only have one antenna.
> Thanks,JimW7JHR
>
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
